Cutting Paving Slabs Ideas – There always comes a time when you have to cut a slab to fit in a given area when designing patio or walkway with slabs. You may have reached the end of the catwalk, for example, and the area only requires a slab half the size of what you used in the rest of the road. You may want to add smaller around the edge of your patio slabs for give a decorative effect. There are several ways to cut slabs.
Mark the place you want to your cutting paving slabs. Use a chisel and hammer to cut the slab paving. Score along the line you drew just firmly pressing the chisel with the mallet. Do not try to cut the pavement slab with one or two blows of the hammer on the chisel. It is better to work your way through the length of the slab floor and then back to the beginning to start another pass, deepen the slab at a time until it snaps in two.
12 Photos Gallery of: Cutting Paving Slabs Ideas
Use a paving stone divider guillotine to cutting paving slabs. Place the slab paving the slot machine with the line in which the sheet is reduced by the same. Bring the level down firmly on the slab. Repeat this several times until closures slabs in two. Use masonry saw blade diamond tip or a saw to cut concrete paving slab. This works like a portable power saw that you would use to cut wood. The diamond-tipped blade, however, will cut through the stone, while a regular wood saw blade will not. Run some water over the area to be cut during the execution of the saw. This will prevent the saw blade and burning it easier for your cut.Tags : catwalk slot