Wall spice rack – Set one of the shelves in long thin edge and positions the two sides on either side of him, boards so that the three way make a “U”. Press the boards together so snug and pre-drilled two holes evenly spaced across each side panel and into the rack; this will serve as the bottom shelf of the shelf for spices. Connect the three boards with wood screws. Slide the other board wall spice rack in position, about 6 inches (15 cm) on the first shelf and parallel to it.
13 Photos Gallery of: DIY Wall Spice Rack
Drills a hole of 1/4 inch (0.6 cm) on each side panel, about 3 inches (7.5 cm) above each shelf and 1/2 inch (1.2 cm) from the front of the spice shelf. Spend two rods through the holes and secure in place at each end with a light layer of wood glue. Leave an hour for wood glue dries.
Put wall spice rack upside down and position the backboard on it. Predrilled holes at the four corners and uniformly along the lateral edges of the rear panel and side panels within. Une backboard to spice shelf with wood screws. Hang the shelf for spices on the wall by screwing directly through the backboard and into the desired section of the wall.