RV outdoor shower – Motor homes and trailers are especially useful to bring the comforts of home in one trip. Replacement and repair of the right components can bring the outdoor shower put back into operation. Instructions: Park the vehicle on a flat surface where it is allowed to drain. Turn off the water pump and / or mains water. Normally the switch water pump is located near the refrigerator. The water pump can be turned off directly as well. The water pump may be located near the water tank, which is usually under a seat or couch.
Remove the outer screws in the RV outdoor shower assembly. You may have to remove the faucet or hose spray before the component can be removed. Check the hoses that lead to the setting. If a hose shows damage as dry putrefaction or holes, replace the hose. There will be a union that leads from the main line of hot and cold water; This is where the new or replacement hose should go.
12 Photos Gallery of: Fixing RV Outdoor Shower
Connect the new or replacement RV outdoor shower accessory lines and connect the device to the RV. Read the instructions fixture for recommendations. Reactivate the water pump and open the main water tap. Try the outdoor shower using both hot and cold settings.