Cut timber 2 by 4 inches to the height and width of the sliding barn door to create the structure. For a stronger structure, timber stacks two 2 by 4 or uses beams 4 by 4 inches (10 by 10 cm). Assemble the structure using metal brackets and galvanized nails or screws. Cut a cross brace and install it in the center of the structure. Cut the boards to the height of the barn door and place on the structure. Sujétalas to the structure using screws or galvanized nails. Use a little glue or adhesive to reinforce them.
Mount the sliding barn door track to the top of the structure, using an accurate carpenter’s level. Wood screws using an electric screwdriver and for mounting the rail to the structure. Monta three or four wheels to rails at the bottom of the barn door if the door will slide on the floor. If the bottom of the door is higher than the ground, which is the case if your barn has a ramp at the entrance, another lane mounted on the bottom of the door.
12 Photos Gallery of: Guidelines Sliding Barn Door
The rails for sliding barn door may be located at any edge of the structure. Measure the distance between the rails mounted, and then installing rails for walls.