Hampton bay ceiling fan is designed to circulate air in a room. This type of fan is an option for “quick connect” that makes them easier to install than other types of fans. This allows you to use an existing lighting fixture. You can install a Hampton Bay fan to determine first what part of the roof should be located. Cut the energy of the room in which you install the fan switching off the circuit breaker. Climb up the ladder and remove the existing light fixture on the ceiling. Remove it to expose the wiring.
Hampton bay ceiling fan, unscrew the cable cover in each of them and then removed the wires connected. Remove the screw of ground support with the screwdriver and then put the old light fixture aside. Find and remove the screws that are used to secure the old electrical box with a screwdriver. Pull it down from the ceiling and then remove the screws that hold the bracket in place. Plug cap plastic anti-short (included with fan) around the power cord. This will prevent wires from being cut with any sharp edges. Insert the power cable through the fan housing. Insert it into the hole in the ceiling and hold it with screws using the power drill.