How to Make a Floating Computer Desk?

Oct 31st

Materials and tools

Floating computer desk design
Floating computer desk design

To construct the floating computer desk, plywood used 1.27 cm thick. You will need two pieces to form the side edges, a piece to form the front edge and two plates to form the upper and lower faces. A support structure constructed with five beams 5.08 x 5.08 cm. You will also need nails 10.16 cm and wood screws.

12 Photos Gallery of: How to Make a Floating Computer Desk?

Image of: Floating computer desk design
Image of: Build floating computer desk
Image of: Ideas for floating computer desk
Image of: Awesome floating computer desk
Image of: Best floating computer desk
Image of: Floating computer desk and chair
Image of: Simple floating computer desk and chair
Image of: Brown floating computer desk
Image of: White floating computer desk
Image of: Modern floating computer desk
Image of: Floating computer desk with storage
Image of: Traditional floating computer desk
 

Work Surface

Cut the plywood to the dimensions you want for the floating computer desk, trying not exceeding 2 meters deep. Mount side edges and the leading edges of the work surface in a “C”. Glue into place and let dry. Once dry, reinforced with two nails per joint.

Wall tack

The wall mount should be seen as an “E” with two beams against the wall and three legs protruding. Measure the length of the inside of the work surface. Cut the wall studs, estimated 11.43 cm long and less than halved. This will give you space to insert the legs of the “E” between the beams that form the back.

Installing the Floating Computer Desk

Screwed into place from behind, one wood screw every 10.16 cm, from the working surface toward the back beams. Screws placed approximately 2.54 cm wall.