Determines the size of the drum lamp shades screen you will create. The lower and upper rings must be of the same diameter. Make small marks with the pencil to create cutting lines for a piece of screen that is 58 inches (147.3 cm) long and 9 ½ inches (24.1 cm) high. Cut the piece of screen carefully with scissors. Place a line of glue on top of the total reverse side of the screen. Place the upper ring in place on the edge of the screen on the line of glue. Wrap the screen around the top ring and hold it in place with clips for hanging clothes as you wrap.
Rotates the screen backhand side and repeat steps 4 and 5 to attach the lower ring. Separate the vertical seam carefully screen and attaches a line of glue inside the edges. Press the seam with your fingers until you’re sure that the seam will not move while dry. Allow the screen to dry completely before proceeding decorating drum lamp shades.
12 Photos Gallery of: Make a Drum Lamp Shades
Paste grosgrain long tape to the screen around the top and bottom drum lamp shades. Applied 2 or 3 inches (5.1 or 7.6 cm) of adhesive and fixes the length of the tape. This continues around the bottom edge of the screen. Repeat the same process with the top edge.