Tufted bench – Lija a wooden plate 30 inches (76.2 cm) long and 15 inches (38.1 cm) wide by 2 inches (5.08 cm) thick and a wooden plate 30 inches (76.2 cm) long by 15 inches (38.1 cm) wide by 1/4 inch (6.3 mm) thick with a medium grade sandpaper. Clean trash from the sand. Stain one side of each plate and the plate edge 1/4 inch (6.3 mm) thick. It stains the four legs decorative. Plate 2 inches (5.08 cm) thick is bench seating; plate of 1/4 inch (6.3 mm) thickness is lower cover for the seat, after it is plush. Measure and mark plate 2 inches (5.08 cm) every 3 inches (7.6 cm) along the length and width. The marks are where bench seating is plush. Drill holes 1/8 inch (3.1 mm) through the bank on each partner.
12 Photos Gallery of: Make Decorative Tufted Bench Plush to Match of the Room
Cover each hole on the side of the bench stained with a strip of tape. Cut a section of fabric. Upholstery threaded needle and insert it through one of the holes in the tufted bench, of the adhesive tape along the length of the fabric. Sliding a button on the needle as it exits the fabric.
Place the wooden board 1/4 inch (6.3 mm) in bench seating on the tape and knotted, with screws. Set all four legs on each corner decorative tufted bench room with screws and a small stand in L.