Your minka ceiling fans concept includes a standard electrical outlet with a removable glass. To access and replace the light bulb, need remove the glass cover of the device. Turn off electrical wall switch. Wait until the fan blades stop spinning because the lamp to cool, if you’ve been on for the last few minutes. Wait about 10 minutes to prevent burning your hand. Get the cover glass. Uses a stool or chair to get to the deck, where it is at too high to reach.
Minka ceiling fans push the glass cover gently upwards. Spin it clockwise with both hands. You will notice that begins to unscrew the fan. When you have completely unscrewed, the cover will start to slide down. Hold it carefully; do not let it fall or crack.Spin the bulb anti clockwise to remove it. Discard the old bulb. Insert the base of the new bulb into the socket of the fan and spin it in the direction of clockwise to install it. Press the glass cover back in place. Hold it with both hands and make it turn towards clockwise to screw it again. It will spin when fully installed.