Outdoor shower enclosure will be the interesting part in your shower area, and its selection based on material will be very important to decor outdoor shower area. For a post in a pot outdoor shower enclosure. Palea the mixture wet concrete around the post until the mixture reaches approximately 1 inch (2.5 cm) below the rim. Repeat the process quick adjustment after working with a pot at a time until you have completed the remaining three. Move pots hardened concrete to form the desired “corners” around the shower place; have to be placed at a right angle and 2.8 ft (0.8 m) apart from each other. Three short lengths of weather resistant material that is each of 5 feet by 3 feet (1.5 to 0.9m) and one that is 5.2 feet by 4.5 feet (1.58 to 1, 3 m).
Central and staple length 5 by 3 feet (1.5 to 0.9 m) of material vertically between two poles Repeat this process twice stapling with the remaining pieces 3 feet (0.9 m) of material, leaving open the shower you want to be next door. Mark 2 inches (5 cm) down from the top of the long piece of 5.2 feet (1.5 m) of material and set your six rings, evenly spaced along the guide line, then trace the inner circles; this will be your outdoor shower enclosure curtain.
12 Photos Gallery of: Convert an Outdoor Shower Enclosure on a Deck
Cut the grommet holes to make them a little smaller than the circles. Unscrew the tension rod to extend slightly beyond the opening of the outdoor shower enclosure door. Insert rings shower curtain tension rod.