Ceiling fan wiring should have good system, therefore the wiring will not disturb the uses and look of the ceiling fan itself. A ceiling fan is used to move air in a room. Many contain ceiling fans lights that can be controlled by a chain or a wall switch. When a ceiling fan is connected to an electrical box, there are often three or four wires of different colors in the box corresponding to an identical cable into the fan. Each cable serves a different purpose, and it is important to connect each cable properly to avoid dangers such as electric shock or fire.
The ceiling fan wiring use the drill and the piece of wood 1 inch (2.5cm) to make a hole in the place where think placing the light switch (for new construction). Use a meter stick to measure the distance between the switch box and light switch. Measure the cable 110 and cut it with cold cuts leaving extra wire at both ends for easy connection.
12 Photos Gallery of: Installing Ceiling Fan Wiring
Ceiling fan wiring takes the measured cable and takes it from the hole in the switch box to the pinhole of light switch. Place the box in the place where you are installing the new switch. Clean the cables at each end to the bottom of the light switch. Add the black wire on the right side and white and copper on the left side.Tags : ceiling fan connection with switch, connection of a ceiling fan