Make a Decorative Occasional Tables

Nov 21st

When you really want to have very good living room, not only coffee table you should add there but you need to have good and beautiful occasional tables as well. It is very interesting to share about how to make a decorative Occasional tables, there are some ways that can be followed  to make a best occasinal table.  Adjust your fence on the table saw, so it is 14 inches from the blade. Setting the blade at an angle of 45 degrees to the fence. Cut the edges of each oak table so they are beveled at an angle of 45 degrees. Place one of the oak boards with three flat beveled edges so that the beveled edges are visible. Screw pine table for oak table so it is flush with the beveled edge, where it reaches its full thickness.

Occasional Tables Side
Occasional Tables Side

Place one of the tables in oak with pine boards together so it is standing on its non-beveled edge. Screw through the pine boards in the other occasional tables oak for both oak boards create a 90 degree angle. The second table should have oak pine boards attached to it, and beveled edges should be joined with a colored border.

12 Photos Gallery of: Make a Decorative Occasional Tables

Image of: Occasional Tables Side
Image of: Picture Of Occasional Tables
Image of: Photo Of Occasional Tables
Image of: Occasional Tables Small
Image of: Occasional Tables Target
Image of: Occasional Tables Unique
Image of: Occasional Tables Overstock
Image of: Occasional Tables with Storage
Image of: Occasional Tables For Living Room
Image of: Occasional Tables Pottery Barn
Image of: Occasional Tables Coffee
Image of: Occasional Tables Accent Tables

Clean with damp cloth bevelled edges and run a bead of glue around the edges. Set the last board on top so that the beveled edges are touching. Place a clamp on each side of the occasional tables top and apply a uniform pressure on the table. Sand down the entire project with sandpaper medium and fine grade. Wipe down with a damp cloth. Apply wood stain and let it dry according to instructions.